Dryvit Efficient Exteriors Since 1969
ES Jacksonville is a certified installer for Dryvit Systems.
A basic render or stucco assembly for concrete or CMU only – applied directly or over approved water resistive barrier and metal lath. Dryvit supplied components are CCP Base, primer, and finish/coating.
CCP 2 offers a traditional stucco assembly, and is used on wood or steel frame construction with a Dryvit approved sheathing. Code approved water resistive barrier and lath are required. Dryvit components are CCP Base, primer, and finish/coating.
CCP 3 enhances option 1 or 2 with the application of Backstop® NT and AquaFlash® over the substrate and rough openings prior to the installation of paper backed lath. This option is used over masonry or framed construction with Dryvit approved sheathing when an air barrier is specified. Dryvit-supplied materials for CCP 3 are Backstop NT/Grid Tape, AquaFlash/Tape, CCP Base, primer and finish/coating.
CCP 4 is an option that can be used to enhance any of the previous configurations shown. It adds the performance of Dryvit fiberglass reinforcing mesh and Genesis® leveling coat to the surface of the stucco, prior to application of primer and finish/coating. This improves surface moisture resistance as well as the aesthetic appearance of the stucco. If this option is selected, Dryvit fiberglass mesh (StandardTM, Standard PlusTM, or Intermediate®) and Genesis are added to the material needed to complete the cladding.
This system is also known as a “strapped” system, and is intended for use on projects where a cavity backed, rainscreen design is specified. CCP 5 utilizes a double sheathing and weather-resistive barrier, with furring strips between the sheathing layers to produce a ventilated cavity, over which the steps in CCP 3 and 4 are followed. A moisture drainage warranty is available with this system – consult Dryvit for details.